38 +1 316.943.6100 | turbinerotables.com PRODUCT LINE | ENGINEERING AeTR holds all of the required delegations, certifications and approvals from the FAA to design, develop, certify and manufacture engineered solutions. First Aviation employs a RS-DER capable of reviewing and approving major repairs, alterations and repair processes in conjunction with the local FAA. The RS-DER delegation is extremely rare, allowing FAvS to write and approve Component Overhaul Manuals on behalf of the FAA / FSDO Flight Standards District Office (FSDO). AeTR is an FAA-certified Production Approval Holder (PAH). As such, AeTR can control the design, manufacture, supply chain and quality of parts produced using Parts Manufacturing Authority (PMA) authorization from the FAA. AeTR, acting under the authority of its PAH certification, certifies, audits and manages a large pool of qualified vendors in order to ensure high quality, short lead times, and competitive costs. AeTR also employs FAA Designated Manufacturing Inspection Representatives (DMIR) who, on behalf of the FAA, inspect and certify that the products AeTR uses are produced in accordance with an appropriate FAA certification. First Aviation has identified, designed, developed, certified and produced the following DMSMS engineered solutions: • Over 150 Parts Manufacturing Approvals (PMA) • Over 20 FAA-approved Repair Processes • Supplemental Type Certificates (STC) • Service Life Extension Program (SLEP) • FAA-approved Component Overhaul Manuals ENGINEERING